Yealink VC400, Руководство пользователя

Страница: 39 / 171

Getting Started
27
6.
Lock the camera to the L-bracket, and then connect the other end of the DVI cable to the
VC400 codec.
Installing Batteries for the Remote Control
Do the following:
1.
Open the battery cover on the back of the remote control.
2.
Insert the batteries with correct polarity.
3.
Replace the battery cover.
Remote Control Battery Safety Information

Never make wrong polarity connection when charging and discharging battery packs.

Avoid crushing, puncturing, or putting a high degree of pressure on any battery, as this can
cause an internal short-circuit, resulting in overheating.

Remove the batteries if they are not in use for long period of time. Battery leakage and
corrosion can damage the remote control, dispose batteries safely.

Do not dispose used batteries in domestic waste. Dispose batteries at special collection
points or return to stores if applies.

Do not dispose batteries in a fire.