Using the optional headset:
1. With the headset connected, press to activate the headset mode.
2. Enter the desired number, and then press the
Send
soft key.
Using the handset:
Pick up the handset.
Answering a call
Using the speakerphone:
Press
Using the headset:
Press
During a call, you can alternate between the headset, hands-free
speakerphone and handset modes by pressing the
HEADSET
key, the
Speakerphone
key or by picking up the handset. Headset mode requires a
headset connected.
Note:
You can reject an incoming call by pressing the
Reject
soft key.
Note:
5. Service Activated
• After a short while the phone will display “Initializing… please wait”.
• Your VoIP service will be activated once the phone has rebooted.
4. Reboot and Complete Setup
• The phone will display “Service Successfully
Activated. Press OK to reboot.”
• Press
OK
to reboot and complete the setup.
• The provisioning process disables the phone’s administration account. If
you require access to the phone’s management interface, please contact
support.
• If the activation was unsuccessful, check your network settings and
move back to step 1, Provision IP Voice Service, and try again.
• If the problem persists, contact device support if any error appears
during the provisioning process.
Note:
Register status icons on the LCD screen:
Registered
Register Failed
Registering
Basic Call Features
To place a call directly:
1. Pick up the handset.
2. Enter the desired number, and then press the
Send
soft key.
To place a call from the local directory:
1. Press
Dir
soft key when the phone is on-hook, then select
All Contacts
.
If multiple numbers for the contact are stored, press or to highlight the
desired number, and then press
Send
again to dial out.
2. Press or to highlight the desired entry, and then press
Send
to dial out.
Using the speakerphone:
1. With the handset on-hook, press .
2. Enter the desired number, and then press the
Send
soft key.
Making a call
Using the handset:
Hang up the handset or press the
EndCall
soft key.
Ending a Call
Using the speakerphone:
Press or press the
EndCall
soft key.
Using the headset:
Press the
EndCall
soft key.
Redial
Press twice when the phone is idle to dial out the last dialled number.
Press to enter the
Placed Calls
list, press or to select the desired entry,
and then press or the
Send
soft key.
5
6
