Yealink T5 Series, Руководство администратора

Страница: 91 / 472

Phone Customization
85
available language list) available for phone display by loading language packs to the IP phone.
Note
The newly added language must be supported by the font library on the IP phone. If the characters in the custom language
file are not supported by the phone, the phone will display “?” instead.
Topics
Customizing a Language Pack for Phone Display
Custom Language for Phone Display Configuration
Example: Setting a Custom Language for Phone Display
Customizing a Language Pack for Phone Display
When you add a new language pack for the phone user interface, the language pack must be formatted as “X.GUI.-
name.lang” (X starts from 014, “name” is replaced with the language name). If the language name is the same as the
existing one, the existing language pack will be overridden by the newly uploaded one. We recommend that the file-
name of the new language pack should not be the same as the existing one.
Note
To modify the translation of an existing language, do not rename the language pack.
Procedure
Open the desired language template file (for example, 000.GUI.English.lang).
Modify the characters within the double quotation marks on the right of the equal sign. Do not modify the item on the
left of the equal sign.
The following shows a portion of the language pack “000.GUI.English.lang” for the phone user interface:
Save the language pack and place it to the provisioning server.
Custom Language for Phone Display Configuration
The following table lists the parameters you can use to configure a custom language for the phone display.