Yealink T5 Series Скачать руководство пользователя

Страница: 391 / 472

Using Handsets with T58V/T58A/T56A Phones

385

It is only applicable to W56H handsets.

Topic

Handset Wallpaper Configuration

Handset Wallpaper Configuration

The following table lists the parameter you can use to configure the handset wallpaper.

Parameter

custom.handset.wallpaper

<y0000000000xx>.cfg

Description

It configures the wallpaper displayed on the handset LCD screen.

Note:

It will take effect on all handsets that are registered on the same phone. It works only if “stat-

ic.auto_provision.handset_configured.enable” is set to 1 (Enabled).

Permitted

Values

-Wallpaper1

-Wallpaper2

-Wallpaper3

-Wallpaper4

-Wallpaper5

Default

-1, do not change the wallpaper set on each handset.

Handset UI

OK->Settings->Display->Wallpaper

Handset Screen Saver

The screen saver of the handset is designed to protect your LCD screen. You can enable the screen saver to protect the

LCD screen, an analog clock will be activated and appear on the LCD screen after the handset is idle for approximately

10 seconds.

It is not applicable to DD phones.

Topic

Handset Screen Saver Configuration

Handset Screen Saver Configuration

The following table lists the parameter you can use to configure the handset screen saver.

Parameter

custom.handset.screen_saver.enable

[1]

<y0000000000xx>.cfg

Description

It enables or disables screen saver feature.

Note:

It will take effect on all handsets that are registered on the same phone. It works only if “stat-

ic.auto_provision.handset_configured.enable” is set to 1 (Enabled).

Permitted

Values

-Disabled

-Enabled, an analog clock will be activated and appear on the LCD screen if no user activity is sensed for

approximately 10 seconds.

Default

Handset UI

OK->Settings->Display->Screen Saver

Содержание T5 Series

























































































































































































































































































































































































































































































Результаты поиска

Содержание T5 Series

Отзывы:

Похожие инструкции для T5 Series

Бренды по названию

Популярные бренды

Yealink T5 Series, Руководство администратора

Результаты поиска

Содержание T5 Series

Отзывы:

Похожие инструкции для T5 Series

Бренды по названию

Популярные бренды