Enterprise IP Phone Using the Basic Phone Functions
- 48 -
2)
After C answered it, A and C can have a private conversation without B hearing it,
then A press the TRAN button to complete the transfer.
3)
A will be disconnected from the call. B can talk to C.
To Semi-Attend Transfer via phone interface:
1)
A and B is on an conversation, A press the TRAN button to put B on hold, then A can
dial a new number C and press the OK or SEND button to call out.
2)
While C is ringing, A hang up or press the TRAN button. Then A will turn to hold
status, and the LCD will display as Transferred.
3)
You will be disconnected from the call, when C pick up, B can talk to C.
Note:
Make sure that the SIP server you have registered supports this function.
3-way Conference
You can establish a three-party conference, during the conversation three phone
parties can communicate with each other.
To establish a conference:
1)
Press the CONF button during an active call.
2)
The first call is placed on hold. You will hear a dial tone. Dial the number to
conference in, then press the SEND key.
3)
Press the MENU key to stop the conference in operation before the call is answered.
4)
When the call is answered, you can have a private conversation at first. And then
press the CONF button, the conference call will now include you and the other two
parties.
5)
Hang up to disconnect all parties.
Network Conference
If you want to make a conference with more than three people, you can open the
function of network conference.
If you enabled this function, you can put the meeting conference on the server.
To enable network conference via web interface:
1)
Choose Account->Account X->Advance->Conference Type, there is a pull-down
menu, choose network from the list.
2)
Enter the Conference URI.
3)
Press Confirm button to save the changes.
