Yealink SIP-T32G страница 70 Скачать руководство пользователя

Страница: 70 / 118

User Guide for the SIP-T32G IP Phone

Answering When Not in Another Call

In all cases, the active call will appear on the LCD screen showing call duration and
destination.

To answer a call using the handset:

Pick up the handset.

To answer a call using the hands-free speakerphone mode:

Do one of the following:

Press .

With the handset on-hook and the headset mode deactivated, press the Answer
soft key.

With the handset on-hook and the headset mode deactivated, press the line key
(the line key LED flashes green).

To answer a call using the headset:

Do one of the following:

Press .

With the headset mode activated, press the Answer soft key.

With the headset mode activated, press the line key (the line key LED flashes
green).

Answering When in Another Call

If you have an active call, and an incoming call arrives on the phone, do one of the
following:

Press the Answer soft key.

The incoming call is answered and the original call is placed on hold.

Press to access the new call.

Press or the Answer soft key.

The incoming call is answered and the original call is placed on hold.

To end a call:

Do one of the following:

If you are using the handset, press the Cancel soft key or hang up the handset.

If you are using the headset, press the Cancel soft key.

Содержание SIP-T32G























































































































Результаты поиска

Содержание SIP-T32G

Отзывы:

Похожие инструкции для SIP-T32G

Бренды по названию

Популярные бренды

Yealink SIP-T32G, Руководство пользователя

Результаты поиска

Содержание SIP-T32G

Отзывы:

Похожие инструкции для SIP-T32G

Бренды по названию

Популярные бренды