Yealink SIP-T23P Скачать руководство пользователя | Manualshive

Страница: 120 / 152

background image

User Guide for the SIP-T23/T23P/T23G IP Phone

110

Accept Intercom

You can enable or disable the phone to automatically answer an incoming intercom call.
If Intercom Allow is enabled, the phone will automatically answer an incoming intercom
call. If Intercom Allow is disabled, the phone will reject incoming intercom calls and
send a busy message to the caller. Intercom Allow is enabled by default.

Note

Intercom Mute

You can mute or un-mute the phone’s microphone for intercom calls automatically. If
Intercom Mute is enabled, the microphone will be muted for intercom calls. If Intercom
Mute is disabled, the microphone will work for intercom calls. Intercom Mute is disabled
by default.

Intercom Tone

You can enable or disable the phone to play a warning tone when receiving an
intercom call. If Intercom Tone is enabled, the phone will play a warning tone before
answering the intercom call. If Intercom Tone is disabled, the phone will automatically
answer the intercom call without warning. Intercom Tone is enabled by default.

Intercom Barge

You can enable or disable the phone to automatically answer an incoming intercom call
while there is already an active call on the phone. If Intercom Barge is enabled, the
phone will automatically answer the intercom call and place the active call on hold. If
Intercom Barge is disabled, the phone will handle an incoming intercom call like a
waiting call. Intercom Barge is disabled by default.

You can use multicast paging to quickly and easily forward out time sensitive
announcements to people within the multicast group. You can configure a multicast
paging key or a paging list key on the phone, which allows you to send a Real Time
Transport Protocol (RTP) stream to the pre-configured multicast address(es) without
involving SIP signaling. You can configure the phone to receive an RTP stream from
pre-configured multicast listening address(es) without involving SIP signaling. You can
specify up to 10 multicast listening addresses.

Your administrator can set a delay time before the phone automatically answers

intercom calls. Contact your system administrator for more information.

«
...
118
119
120
121
122
...
»

Содержание SIP-T23P

























































































































































Отзывы:

Нет отзывов

Похожие инструкции для SIP-T23P

Бренд: D-Link Страницы: 29

Бренд: Neoi Страницы: 50

Solstice II SGH-A817

Бренд: Samsung Страницы: 199

Бренд: Samsung Страницы: 192

Бренд: Samsung Страницы: 193

Бренд: Samsung Страницы: 2

Бренд: Mitsubishi Страницы: 72

Бренд: TCL Страницы: 25

Бренд: Netway Страницы: 68

Бренд: HANNspree Страницы: 75

Бренд: ATL Страницы: 4

Бренд: Doogee Страницы: 39

Бренд: Lemon Страницы: 33

Бренд: Samsung Страницы: 128

SGH-T259 Series

Бренд: Samsung Страницы: 155

SGH-T229 Series

Бренд: Samsung Страницы: 140

SGH-T109 Series

Бренд: Samsung Страницы: 128

SGH-T159 Series

Бренд: Samsung Страницы: 173

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды