Yealink SIP-T20 Скачать руководство пользователя страница 76

Страница: 76 / 126

User Guide for the SIP-T20P/SIP-T20 IP Phone

To configure the DND authorized numbers via web user interface:

Click on Features->Forward & DND.

Select Enabled from the pull-down list of DND Emergency.

Enter the numbers in the DND Authorized Numbers field.

For multiple numbers, enter a comma between every two numbers.

Click Confirm to accept the change.

When DND is enabled on the phone, the phone can still receive incoming calls from
the numbers specified in the DND Authorized Numbers field.

Note

You can configure your phone to forward incoming calls to another party by the static
forwarding. You can also forward calls while your phone is ringing, refer to the dynamic
forwarding.

Static Forwarding

Three types of static forwarding:



Always Forward: Incoming calls are immediately forwarded.



Busy Forward: Incoming calls are immediately forwarded if the phone is busy.

DND authorized number is configurable via web user interface only.

Содержание SIP-T20































































































































Результаты поиска

Содержание SIP-T20

Отзывы:

Yealink SIP-T20, Руководство пользователя, Страница: 76 / 126

Результаты поиска

Содержание SIP-T20

Отзывы: