Yealink SIP-T20 Скачать руководство пользователя страница 106

Страница: 106 / 126

User Guide for the SIP-T20P/SIP-T20 IP Phone

Option

Description

subscribe for MWI and the voice mail number in advance.

Note

To enable MWI subscription via web user interface:

Click on Account.

Select the desired account from the pull-down list of Account.

Click on Advanced.

Select Enabled from the pull-down list of Subscribe for MWI.

Enter the period time in the MWI Subscription Period (Seconds) field.

Click Confirm to accept the change.

To enable Subscribe MWI to Voice Mail via web user interface:

Click on Account.

Select the desired account from the pull-down list of Account.

Click on Advanced.

Select Enabled from the pull-down list of Subscribe MWI To Voice Mail.

Whether the phone sends SUBSCRIBE messages for MWI service to the account or the
voice

mail

number depends on the server. Contact your system administrator for more

information.

Содержание SIP-T20































































































































Результаты поиска

Содержание SIP-T20

Отзывы:

Yealink SIP-T20, Руководство пользователя, Страница: 106 / 126

Результаты поиска

Содержание SIP-T20

Отзывы: