Triggering the IP Phone to Perform the Auto Provisioning
33
Triggering the IP Phone to Perform the Auto
Provisioning
This chapter introduces the following methods to trigger the IP phone to perform the auto
provisioning process:
Power On
Repeatedly
Weekly
Flexible
Auto
Provision
Auto Provision Now
Multi-mode Mixed
SIP NOTIFY Message
Auto Provisioning via Activation Code
Power On
The IP phone performs the auto provisioning process when the IP phone is powered on.
To activate the power on mode via a web user interface:
1.
Click on
Settings
->
Auto
Provision
.
When there is an active call on the IP phone during auto provisioning, the auto provisioning
process will detect the call status every 30 seconds. If the call is released within 2 hours, the auto
provisioning process will be performed normally. Otherwise, the process will end, due to timeout.
Содержание SIP-CP Series
