Enterprise IP Phone Using the Advanced Phone Functions
- 24 -
Call Return
When the key is configured as Call Return key you are allowed to dial out the last phone
call you received.
To assign the key as Call Return:
1)
Choose Phone->DSS Key->Line Key, choose one of the key you want to make the
assignment, there is a pull-down menu in the Type field, choose KeyEvent from the
list, then in the Mode field, open the pull-down menu and choose Call Return from
the list.
2)
Press Confirm button to save the changes.
Pick Up
When you configure a Pick Up key, you specify the extension that you want to monitor.
Then, when the monitored extension receives a call, you can press this key to pick up
the incoming call.
To assign the key as Pick Up:
1)
Choose Phone->DSS Key->Line Key, choose one of the key you want to make the
assignment, there is a pull-down menu in the Type field, choose KeyEvent from the
list, then in the Mode field, open the pull-down menu and choose Pick Up from the
list.
2)
In the "Line" field, select a line for which to apply this key, and enter the condition
code.
3)
Press Confirm button to save the changes.
Call Park
Call Park is a feature that allows a person to put a call on hold at one telephone set and
continue the conversation from any other telephone set.
The “call park” feature is activated by pressing a preprogrammed button or a special
sequence of buttons. This transfers the current conversation to an unused extension
number and immediately puts the conversation on hold. The telephone system will then
display the extension number of the parked call so that the call can later be retrieved.
To assign the key as Call Park:
1)
Choose Phone->DSS Key->Line Key, choose one of the key you want to make the
assignment, there is a pull-down menu in the Type field, choose KeyEvent from the
list, then in the Mode field, open the pull-down menu and choose Call Park from the
list.
2)
In the "Line" field, select a line for which to apply this key, and enter the extension
number you want to park.
3)
Press Confirm button to save the changes.
