| Basic Settings of Teams Room Systems |
25
Enabling/Disabling Auto-framing
Auto-framing is mainly based on face detection, which provides real-time detection and position tracking on all faces
in the conference room. All participants in the output screen are covered and the camera can be automatically adjusted
according to the number of participants and the position changes.
About this task
Auto-framing is only applicable to UVC30 Room and is disabled by default. When the auto-framing feature is
enabled, you can not control the UVC30 Room camera position.
Procedure
1.
Tap
to enter the
Camera Control
page.
2.
Select .
3.
Enable/Disable the
Auto-framing
.
Controlling UVC80/UVC50/UVC30 Room Camera Position
Before you begin
Only when the auto-framing feature is disabled, can you control the UVC30 Room.
Procedure
1.
Tap
to enter the
Camera Control
page.
2.
Tap
/
to zoom camera out/in.
3.
Tap the arrow keys to pan/tilt the camera.
Resetting UVC80/UVC50/UVC30 Room Camera to Home Position
Procedure
1.
Tap
to enter the
Camera Control
page.
2.
Tap
Reset
.
Creating the Preset Position on the Yealink RoomConnect Software
Presets specify the settings of both the angle and the focal length for the camera that can be used to quickly point a
camera at a pre-defined location. And only administrators have permission to use Yealink RoomConnect. Presets are
not applicable to UVC30 Room.
Содержание MVC500
Страница 1: ......
