Yealink MeetingSpace VC500, Руководство администратора

Страница: 56 / 281

Administrator’s Guide for Yealink VC800&VC500 Video Conferencing System
40
Description Port Range Port Type
Reserved Ports on page 40 .
Web management port (optional) 443 TCP
Restricting Reserved Ports
By default, the system communicates through TCP and UDP ports in the 50000 - 54999 range
for video, voice, presentations, and camera control. The system uses only a small number of
these ports during a call. The exact number depends on the number of participants in the call,
the protocol used, and the number of ports required for the type of call: video or voice.
To minimize the number of UDP and TCP ports that are available for communication, you can
restrict the ports range
The following tables identify the number of ports required per connection by protocol and the
type of call. Make sure at least 200 TCP ports and 200 UDP ports are reserved for VC800/VC500
system.
Required ports for an H.323 two-way call:
Call Type Number of Required Ports
Video
8 UDP ports (6 if presentation is disabled)
2 TCP ports
Voice
2 UDP ports
2 TCP ports
Each additional video participant requires 8 UDP ports and 2 TCP ports.
Each additional audio participant requires 2 UDP ports and 2 TCP ports.
Required ports for a SIP two-way call:
Call Type Number of Required Ports
Video 8 UDP ports (5 if presentation is disabled)
Voice 2 UDP ports
Each additional video participant requires 8 UDP ports.
Each additional audio participant requires 2 UDP ports.
Parameters for reserved ports on the system are described below:
Parameter Description Configuration Method
UDP Port Scope
Configures the range of the UDP
ports.
Valid values:
1-65535
Default range:
50000-50499
Remote Control
Web User Interface