Mount onto a TV Stand or a Tripod
Steps
：
1
2
3
5
Remote Control and Cable Ties Installation
Install batteries
Fasten the cables with the cable tie
SN
MA
C
Reset
SN
MA
C
Reset
SN
MAC
Reset
Screw specification: M3×8
1
2
SN
MAC
Reset
SN
MA
C
Reset
SN
MA
C
Reset
Screw specification: M3×8
SN
MAC
Reset
3
SN
MAC
Reset
1
2
3
TV Stand
Push the VESA accessory along the track of the VC500 codec.
Secure the VESA accessory to the VC500 codec using the M3×8 screws.
Align the location pillar at the location hole , and then secure the bracket to the VESA accessory using the 1/4”-20 UNC screw.
You need to purchase a TV stand or a tripod separately. The TV stand or tripod has the same requirements as the backet used in the
ceiling-mounted installation method.
The installation steps are the same as the ceiling-mounted installation steps.
