Enterprise IP Phone Using the Basic Call Functions
Answering a call
Answering an incoming call
1)
If you are not on an active call, lift the handset to answer it using the handset, or
press the Speaker button to answer it using the speakerphone, or press the
headset button to answer it using the headset.
2)
If you are on an active call, the LCD will prompt to display:
Incoming Call
：
xxx
.
Press Answer hot key to answer the call, or Reject hot key to refuse it.
During the conversation, you can alternate between Headset, Handset and Speaker
mode by pressing the corresponding buttons or picking up the handset.
Denying an incoming call
Press Reject hot key or X button to deny the incoming call directly.
DND
Press DND hot key to active DND Mode. Further incoming calls will be rejected and the
display shows:
icon. Press DND hot key again to
deactivate DND mode. You can
find the incoming call record in the Call History.
You can also set DND function by the DND Code:
1)
Go to Menu->Features->DND Code to enter the configuration interface.
2)
Set the DND On Code and the DND Off Code, then press the Save hot key to save
the changes.
3)
When you press the DND hot key, the phone will send a message to the server, and
the server will turn on the DND function. Then any calls to the extension will be
rejected by the server automatically. And the incoming call record will not be
displayed in the Call History.
