background image

6

Option1

: Deploy the endpoint following the same steps as for the head office. In this way, 

                both inbound and outbound calls are available.

Option2

: Deploy the endpoint using intelligent traversal. You only need to assign a private IP 

                address to your endpoint. Make sure this private IP address can access the public network. 

                Only outbound calls are available when using this method. 

      When you use intelligent traversal to deploy your endpoint, you have to open following ports on 

       your firewall if they are restricted.

 

       It is recommended that you forward the web management port(443/TCP) to the public network, so 

       that the head office can remotely manage the branch office.

Troubleshooting

     Connectivity Testing

After installation and deployment, you can test the endpoint by dialing the Yealink Demo Room 

(

117.28.251.50 or 117.28.234.45 

). If you can’t dial out successfully, please contact your IT administrator 

to check the network. 

     Configuring Static NAT

If you do not use Cloud platform and deploy your endpoint in an Intranet, you have configured port 

mapping on the firewall or gateway, but you find that local endpoint appears black screen and you 

cannot hear sound when you call Yealink Demo or other endpoints. The most likely reason is that the 

firewall or gateway in your environment does not support the ALG feature. In this situation, please take 

the following actions so that the static NAT feature on the endpoint can solve this problem. 

To configure static NAT via the remote control:

1. 

 Select 

More

->

Network

->

Wired Network 

(Default Admin Password:0000)->

NAT/Firewall

.

2. 

Select

 Auto

 from the pull-down list of

 Type

, the endpoint will obtain public IP address automatically.

3. 

 If the endpoint does not obtain a public IP address automatically, select 

Manual Settings

 from the 

     pull-down list of

 Type

, and then enter the public IP address in the 

Public IP Address

 field.

4. 

Save the change. 

 

Port

Function

H.323 signal port

SIP

 optional 

Audio & Video media stream port

Protocol Type

UDP/TCP
TCP/UDP
TCP/UDP

50000-51000

5060-5061

1719-1720

Содержание 300628









Отзывы: