YBA DESIGN YA701, Руководство пользователя

Страница: 27 / 54

ENGLISH PAGE 27
DESIGN
The following message appears :
Adjust LipSinc delay ? Adjust LipSinc delay ? Adjust LipSinc delay ? Adjust LipSinc delay ?
The current value (in ms) is indicated below the message
Use the and
----
to change the value of the LipSync. You can select a value from 0 to
–
30 ms.
Press
OK
OK OK
OK
to confirm the value and exit the menu.
STEP 8.4
–
BASS MODE
You access to the BASS MODE by going to the
SET
SET SET
SET
menu, then
MORE
MORE MORE
MORE
then
NEXT
NEXT NEXT
NEXT
and select
BASS MODE
BASS MODE BASS MODE
BASS MODE
Note :
•
The indication LFE (or.1) refers to the subwoofer channel (frequencies up to 120 Hz) of a Dolby or DTS
coded content.
•
The indication
“
CROSSOVER
”
refers to the value of the crossover frequency (frequency below which you tell
your YA701 to cut from the MAIN speakers and send to the SUBWOOFER output).
This menu lets you tell your YA701 how to manage the BASS exactly the way you want to :
•
by adjusting the CROSSOVER to perfectly match your speakers and subwoofer specifications. We highly
suggest to refer to your speakers user manual or to contact your speaker manufacturer.
•
by adjusting the BASS MODE between on of the 5 available modes.
8.4.1
–
Adjusting the CROSSOVER value
The CROSSOVER menu lets you tell your YA701 the exact crossover frequency you wish to match your speakers.
The CROSSOVER is a function embedded in the powerful DSP of your YA701 that divides the frequency spectrum into
two parts. It acts as a filter, allowing high frequencies to pass through to the speaker while low frequencies are sent
to the subwoofer. As this filter is a digital process, there is no loss, distortion or limitations.
Selecting the right crossover for your system is a process that involves much listening and experimentation.
Sometimes it can be easy (such as when your loudspeaker manufacturer gives you the value to use) and sometimes it
can be more difficult.
Your YA701 offers a flexible bass management system so you can adjust the value per 10 Hz steps from 40 Hz to 150
Hz and then per 25 Hz steps from 150 Hz to 250 Hz.
YA701 - SYSTEM SETUP USING THE FRONT PANEL