Yazoo/Kees ZMKH52252 Скачать руководство пользователя страница 59

Страница: 59 / 68

SERVICE JOURNAL

English

Action

Date, mtr reading, stamp, sign

Delivery Service

Charge the battery.

Mount the rear wheels.

Adjust the tire pressure of all wheels to 15 PSI (1 bar).

Mount the steering controls in the normal position.

Connect the seat fold-up stop.

Connect the cable for the seat’s safety switch.

Mount the arm rests on the seat back support.

Check the oil in the engine.

Check the oil in the hydraulic tank.

Adjust the position of the steering controls.

10.

Fill with fuel and open the fuel shut off valve.

11.

Check the machine for transport damage.

12.

Start the engine.

13.

Check that there is drive to both wheels. Bleed if necessary.

14.

Check the mower deck adjustment.

15.

Check:

16.

The safety switch for the parking brake.

The safety switch for the mower deck.

The safety switch in the seat.

The safety switch in the steering controls.

Parking brake functionality.

Driving forward.

Driving backward.

Engaging the blades.
Check the idle speed.

17.

Check the engine high idle speed

18.

Inform the customer about:

19.
The need and advantages of following the service schedule.
The need and advantages of leaving the machine

for service every 300 hours.

The effects of service and maintaining a service journal

on the machine’s resale value.

Application areas for mulching.

Fill in the sales papers, etc.

20.

Delivery service has been carried out.
No remaining notes.

Certified:

Содержание ZMKH52252




































































Результаты поиска

Содержание ZMKH52252

Отзывы:

Бренды по названию

Популярные бренды

Yazoo/Kees ZMKH52252, Руководство оператора

Результаты поиска

Содержание ZMKH52252

Отзывы:

Бренды по названию

Популярные бренды