Yazoo/Kees ZMKH52252 Скачать руководство пользователя страница 23

Страница: 23 / 68

CONTROLS

English

Motion Control Levers

The machine’s speed and direction are continuously

variable using the two steering controls. The steering

controls can be moved forward or backward about

a neutral position. Furthermore, there is a neutral

position, which is locked if the steering controls are

moved outward.
When both controls are in the neutral position (N), the

machine stands still.
By moving both controls an equal amount forward or

backward, the machine moves in a straight line forward

or backward respectively.
In order, for example, to turn right while moving

forward, move the right control towards the neutral

position. The rotation of the right wheel is reduced and

the machine turns to the right.
Zero turn can be achieved by moving one control

backward (behind the neutral position) and carefully

moving the other steering control forward from its

neutral position. The rotation direction when zero

turning is determined by which steering control is

moved backward behind the neutral position. If the left

steering control is pulled backward, the machine turns

to the left. Use extra care when using this maneuver.

8011-788

Steering controls

Motion control lever pattern (right side)

Forward

Neutral

Lock

Reverse

CAUTION!

The machine can turn very rapidly if one

steering control is moved significantly

further forward than the other.

Содержание ZMKH52252




































































Результаты поиска

Содержание ZMKH52252

Отзывы:

Бренды по названию

Популярные бренды

Yazoo/Kees ZMKH52252, Руководство оператора

Результаты поиска

Содержание ZMKH52252

Отзывы:

Бренды по названию

Популярные бренды