background image

15

Caring For Hoses

1. Inspect hoses before each use.  If hoses have

excessive wear, tears, or punctures, replace
immediately.

2. To prolong the life of the hose, periodically ro-

tate hose and turn hose end to end.  Refer to
Preventative Maintenance Schedule in this
manual.

3. Avoid twists and sharp turns in the hoses, as

they will increase wear on the hoses.

4. Avoid dragging the lower hose along the sides

of buildings or other hard surfaces.

SERVICE AND MAINTENANCE

Cleaning Poly Mesh

The poly mesh on the collection system is located
inside the container hood.  For best results, clean
poly mesh regularly.

Cleaning Instructions
1. Shut off engine.
2. Release the two (2) rubber latches under the

rear of the hood. Open hood and brush debris
off of both sides.

3. Close hood and re-latch.

DO NOT USE THE COLLECTION SYSTEM
WITHOUT POLY MESH SECURELY IN PLACE.

Caring For Bags

Inspect the bags before each use. If bags have
excessive wear, tears or punctures, replace im-
mediately.
Cleaning Instructions

NOTE: 

Under normal usage the bag material is

subject to deterioration and wear.

Get other manuals https://www.bkmanuals.com

Содержание CS1372

































Отзывы: