8
7
9
10
CONNECT THE FLAT CABLE AND MOUNT THE
METAL SHEET (IT'S IN THE HARDWARE PACK)
11
12
MOUNT THE SIDE RAIL ON THE ROLL (OPTIONAL, STEP
"A1"). THEN MOUNT THE ROLL ON THE ROLL ARC SO
THAT THE "FRONT" SIGNS ARE ALIGNED TO EACH OTHER.
SCREW TOGETHER AS SHOWN IN THE PICTURE
PLACE THE PITCH ON TOP AND MOVE IT
BACK & FORTH, THEN CLOSE THE
LOCKING MECHANISMS WHICH WERE
OPENED IN STEP 4..
SUPPORT THE PITCH WITH THE
SUPPORT PLASTIC.
AT THE FRONT SIGN, PUSH IT
BACKWARDS AND THEN PLACE
THE SUPPORT ON THE 2D TO
HOLD THE PITCH
SCREW ON THE
PITCH DOOR (IT'S IN
THE HARDWARE
PACK)
THEN YOU CAN
REMOVE THE
SUPPORT PLASTIC
FROM STEP 8
INSERT THE ROLL ARC INTO THE PITCH,
ACCORDING TO THE ARROWS WHILE
PUSHING THE TOP OF THE
ROLL ARC CONTINUOUSLY
TOWARDS THE BACK OF
THE PITCH.
THEN INSTALL THE
BUMPERS ON THE
OTHER SIDE OF THE
ROLL ARC
2 / 4
