V. Seat, Footholder and Footrest assembly
Step 10.: Assemble the Footholder with the seat
Turn the seat upside down. Loosen the screws of the seat where
the Footholder will be slid into.
Slide the Footholder into the retainer on the bottom of the seat.
Push it through well over the top (this is how you can adjust the
length of the Footholder).
Tighten the screws. Turn the seat back over.
Step 11.: Assemble the Footrest plate with the Footholder
Remove the 4 screws from the footrest (keep them close though,
you will need them soon).
Attach the footrest plate (use the previously removed screws)
Mount the footrest plate setting it to a desired angle. Place the
screws in the pre-drilled holes. Tighten the screws to secure the
footrest plate.