Operation
CONTROL PANEL
Power Button
Setting Button
Digital Display
Timer Button
Speed Button
POWER button
Press to turn the dehumidifier on and off.
-4-
"
BUCKET FULL" Indicator Lights
SPEED
Full
SETTING button
The humidity level can be set within a range of 30%RH to 80%RH in 5% increments.
-When it starts work, it will first automatically detect and show the room's
humidity(and temperature). Press the "SETTING" button to change the humidity
selection in 5% increments. It can be set circularly. (After you have set the desired
humidity, the readout will display the actual room humidity.)
-When the humidity level overtakes or drops to the level you set, the dehumidifier
will automatically begin working or stop.
-When the humidity level is set at 30%RH, the dehumidifier will be at CONTINUOUS
dehumidifying mode.
TIMER Button
The "TIMER" Button enables you to either Delay Start or Delay Stop the unit in the
choice from 1 hour to 24 hours. In the shutdown state, the timer is set to the timing
boot. In the boot state, the timer is set to the time shutdown.
TIMER setting:
1. Press "TIMER" button to change the delay timer at 1 hour increments, up to 24
hours. The control will count down the time remaining until start.
2. Click “TIMER” button, the control will display the room temperature like before.
Click “TIMER” button again at any time will stop the TIMER function.
-Turning the dehumidifier ON or OFF at any time or adjusting the timer setting to
0.0 will cancel the Auto Start/Stop function.
