YATO YT-23247, Оригинальное руководство пользователя

Страница: 11 / 88

11
EN
O R I G I N A L I N S T R U C T I O N S
PRODUCT OVERVIEW
The cordless compressor is a device that allows for in fl ating tyres or other objects, e.g., balls or mattresses with compressed air.
The product enables both the power supply from the battery and the electrical system of the vehicle with a voltage of 12 V. The
correct, reliable and safe operation of the device depends on its proper use, therefore:
Read the entire instructions manual before the fi rst use of the device, and keep it for future reference.
The supplier shall not be held liable for any damage resulting from failure to observe the safety regulations and recommendations
speci fi ed in this manual.
PRODUCT EQUIPMENT
In the case of the YT-23247 article, the product is equipped with a battery and a dedicated charger. The article YT-23248 does not
have a battery and charger. Both articles are equipped with accessories to facilitate in fl ating of various items.
TECHNICAL DATA
Parameter Unit Value
Catalogue No. YT-23247, YT-23248
Rated voltage [VDC] 18
Rated power [W] 60
Rated pressure [MPa / bar / PSI] 1.1/11/116
In fl ating capacity [l/min] 21
Noise level
- sound pressure L
pA
± K [dB(A)] 71.2 ± 3.0
- power L
wA
± K [dB(A)] 82.2 ± 3.0
Weight [kg] 1.65
Protection rating IPX0
Battery type Li-Ion
Battery capacity [Ah] 3
Charger*
Input voltage
[V~] 220 - 240
Mains frequency [Hz] 50 / 60
Rated power [W] 60
Output voltage [VDC] 21 DC
Output current [A] 2.4
Charging time** [h] 1.5
* only for models equipped with a battery and charger
** the speci
fi ed charging time applies only to the battery with the capacity listed in the table
The declared noise emission value has been measured using the standard test method and can be used to compare one tool to
another. The declared noise emission value can be used in the preliminary exposure assessment.
Caution! Safety measures to protect the operator, which are based on an assessment of emission exposure under actual con-
ditions of use (including all parts of the work cycle, such as the time when the tool is turned o ff or idle and the activation time),
must be speci fi ed.
SAFETY INSTRUCTIONS
Learn how to use the tool. Do not start working or charging before reading the instructions
manual. Following the guidelines contained in the instructions manual reduces the risk of
injury, electric shock or fi re.
The device is not intended for use in potentially explosive atmospheres in highly humid and
dusty environments. The temperature at the workplace should be within the range of +5
O
C to
+40
O
C, and the relative humidity should not exceed 80%. The device should not be operated