8.
In the
OPC UA Configurator
switch to the online dialog and transfer the
OPC UA
configuration. For communication the IP address data are taken from the TIA Portal
project.
ð
The
OPC UA
configuration is now complete. For check you will find information
about your
OPC UA
configuration on the device web page at
‘OPC UA’
.
Chap. 4.11.1.1.1 ‘Tab: ‘OPC UA’ ’ page 97
You can use the CMD auto commands OPCUA_PGOP_ENABLE and
OPCUA_PGOP_DISABLE to enable or disable OPC UA. After a power
cycle or loading a hardware configuration, the settings are retained. With
reset to the factory settings or over all reset, the OPC UA project is set to
Chap. 4.18 ‘CMD - auto commands’
7.7 Usage OPC UA Configurator
7.7.1 OPC UA Configurator
The user interface of the
OPC UA Configurator
is divided into the following areas:
1
Menu bar
2
Toolbar
3
Project tree
4
Workspace
5
Output area
In the menu bar you will find a few general commands on the
OPC UA Configurator
. Fur-
ther commands can be called up via context menus with the right mouse button, e.g.
functions for an object in the project tree.
Store
OPC UA
configuration
Compile
OPC UA
configuration
Menu bar
Toolbar
VIPA System SLIO
Deployment OPC UA
Usage OPC UA Configurator > OPC UA Configurator
HB300 | CPU | 013-CCF0R00 | en | 19-30
199