YASKAWA SI-P3V, Техническое руководство

Страница: 8 / 40

8 YASKAWA ELECTRIC SIEP C730600 23B V1000 Option PROFIBUS-DP Technical Manual
3 Receiving
3 Receiving
Please perform the following tasks after receiving the PROFIBUS-DP Option:
• Inspect the PROFIBUS-DP Option for damage.
If the PROFIBUS-DP Option appears damaged upon receipt, contact the shipper immediately.
• Verify receipt of the correct model by checking the information on the nameplate (see Figure 2 ).
• If you receive the wrong model or the PROFIBUS-DP Option does not function properly, contact your supplier.
‹
Contents and Packaging
Table 2 Contents of Package
‹
Tool Requirements
Note: Tools required to prepare PROFIBUS cables for wiring are not listed in this manual.
Description: Option Unit Ground Cables Warning Labels Installation Manual
_
Quantity: 1 4 1 1
A Phillips screwdriver (M3, M3.5 to M6
<1>
) metric or (#1, #2
<1>
) U.S. standard size is required to install the PROFIBUS-DP Option.
<1> Screw sizes vary by drive capacity. Select a screwdriver that matches the drive capacity.
MANUAL