YASKAWA SI-N3/V, Техническое руководство

Страница: 10 / 102

3 Receiving
10 YASKAWA SIEP C730600 84G DeviceNet Technical Manual
• Make sure that the model number on the option nameplate and the model number on the purchase order are the
same. Refer to
Figure 4.1 for more information.
•
Contact the distributor where you purchased the option or contact Yaskawa or a Yaskawa representative about
any problems with the option.
◆
Option Package Contents
Table 3.1 Contents of Package
Option Contents Quantity
Option 1
Ground wire
*1
1
Screws (M3) 3
*2
LED label
1000-Series, Z1000U 1
GA500, GA700, and GA800 1
Manuals 1
*1 GA700 and GA800 drives do not use the ground wire.
*2 Only two screws are necessary to install the option on GA700 and GA800 drives.
Note:
The LED label for FP605 drives is packaged with the FP605 drive.
Figure 3.1 LED Label for FP605
◆
Installation Tools
You can use these tools to install the option to the drive:
•
A Phillips screwdriver or slotted screwdriver (M3
*1
)
•
A flat-blade screwdriver (blade depth: 0.4 mm (0.02 in.), width: 2.5 mm (0.1 in.)).
•
A pair of diagonal cutting pliers.
•
A small file or medium-grit sandpaper.
*1 Phillips screw sizes are different for different drive capacities. Prepare different screwdrivers for different
screw sizes.