YASKAWA S-7 Series, Руководство по управлению

Страница: 49 / 191

2.3 Command Header Section of Subcommand Area
2.3.3 Subcommand Status (SUB_STAT)
2-12
Details of Control Bits
The following table shows the details of the control bits.
2.3.3 Subcommand Status (SUB_STAT)
The following describes the subcommand status of responses.
Byte 33 to byte 35 of the response format are specified as the SUB_STAT field.
The SUB_STAT field is specified as shown below by the communication specification.
SUB_STAT Field
Details of Status Bits
The following table shows the details of the status bits.
*
When no subcommand is used, the SUBCMDRDY status bit is set to "1."
Bit Name Description Value Setting
12 to
15
SEL_MON4 Monitor selection 4 0 to 15 Selects the monitor information with the setting value.
16 to
19
SEL_MON5 Monitor selection 5 0 to 15 Selects the monitor information with the setting value.
20 to
23
SEL_MON6 Monitor selection 6 0 to 15 Selects the monitor information with the setting value.
bit 7 bit 6 bit 5 bit 4 bit 3 bit 2 bit 1 bit 0
Reserved Reserved Reserved SUBCMDRDY Reserved Reserved
bit 15 bit 14 bit 13 bit 12 bit 11 bit 10 bit 9 bit 8
SEL_MON4 SUBCMD_ALM
bit 23 bit 22 bit 21 bit 20 bit 19 bit 18 bit 17 bit 16
SEL_MON6 SEL_MON5
Bit Name Description Value Setting
2 SUBCMDRDY
*
Subcommand ready
1 Subcommand reception enabled
0 Other
8 to 11 SUBCMD_ALM Subcommand alarm 0 to 15
Refer to the following section.
2.2.4 Command Status
(CMD_STAT)
on page 2-7 .
12 to 15 SEL_MON4 Monitor selection 4 0 to 15
Indicates the selected monitor
information. (Copy of the command)
16 to 19 SEL_MON5 Monitor selection 5 0 to 15
Indicates the selected monitor
information. (Copy of the command)
20 to 23 SEL_MON6 Monitor selection 6 0 to 15
Indicates the selected monitor
information. (Copy of the command)