background image

1  Preface and Safety

6

 

YASKAWA ELECTRIC

 TOBP C730600 55A 1000-Series Option PS-A10 Installation Manual

General Safety

General Precautions

• The diagrams in this book may include options and drives without covers or safety shields to 

illustrate details. Be sure to reinstall covers or shields before operating any devices. Use the option 
according to the instructions described in this manual.

• Any illustrations, photographs, or examples used in this manual are provided as examples only and 

may not apply to all products to which this manual is applicable.

• The products and specifications described in this manual or the content and presentation of the 

manual may be changed without notice to improve the product and/or the manual.

• When ordering new copies of the manual, contact a Yaskawa representative or the nearest Yaskawa 

sales office and provide the manual number shown on the front cover. 

DANGER

Heed the safety messages in this manual.

Failure to comply will result in death or serious injury.
The operating company is responsible for any injuries or equipment damage resulting 
from failure to heed the warnings in this manual.

NOTICE

Do not modify the drive or option circuitry.

Failure to comply could result in damage to the drive or option and will void warranty. 
Yaskawa is not responsible for any modification of the product made by the user. This 
product must not be modified.

Do not expose the drive or option to halogen group disinfectants.

Failure to comply may cause damage to the electrical components in the drive or option. 
Do not pack the drive in wooden materials that have been fumigated or sterilized.
Do not sterilize the entire package after the product is packed.

Содержание PS-A10LB








































Отзывы: