Please configure this option only when changing the panel, otherwise
the display may not work.
The options are
‘Tact Switch’
,
‘Manual’
and
‘Light Sensor’
. The
default setting is
‘Manual’
and the Backlight option below will be con-
figurable.
Adjust the brightness of the backlight.
This field is used to configure the memory size of the fixed graphics,
the options are 128MB and 256MB.
This field is used to configure the south bridge chipset.
This section disables Azalia or enables HD Audio.
This section is used to disable or enable SMBus controller.
This section is used to configure high precision event timer.
System response when power returns after an AC power failure.
Last State - The system will return to the state where you left off
before power failure occurs.
Power Off - The system’s power is off. You must press the power
button to Power On the system.
Power On - (default) The system will automatically Power On.
Enables or disables
‘Beep’
.
Backlight On/Off
Reverse
Backlight Dimming
Control Select
Backlight
Fixed Graphics Memory
Size
Submenu "South
Bridge"
Azalia Controller
SMBus Controller
High Precision Timer
Restore AC Power Loss
Beep
VIPA HMI
BIOS setup
Chipset
HB160 | PPC | 67K-PNL0 | GB | 16-40
47
