YASKAWA MOTOMAN DX100, Инструкция по эксплуатации

Страница: 6 / 55

vi
150880-1CD
150880-1CD
MotoAdmin Program
Descriptions of the programming pendant keys, buttons, displays and
keyboard of the PC are shown as follows:
Description of the Operation Procedure
In the explanation of the operation procedure, the expression “Select • • • “
means that the cursor is moved to the object item and the SELECT key is
pressed, or that the item is directly selected by touching the screen.
Registered Trademark
In this manual, names of companies, corporations, or products are
trademarks, registered trademarks, or brand names for each company or
corporation. The indications of (R) and TM are omitted.
Equipment Manual Designation
Programming
Pendant Character Keys The keys which have characters printed on
them are denoted with [ ].
e.g. [ENTER]
Symbol Keys The keys which have a symbol printed on them
are not denoted with [ ] but depicted with a
small picture.
e.g. PAGE key
The cursor key is an exception, and a picture is
not shown.
Axis Keys
Numeric Keys “Axis keys” and “Numeric keys” are generic
names for the keys for axis operation and
number input.
Keys Pressed
Simultaneously When two keys are to be pressed
simultaneously, the keys are shown with a “+”
sign between them.
e.g. SHIFT key + COORD key
Mode Key Three kinds of modes that can be selected by
the mode key are denoted as follows:
REMOTE, PLAY, or TEACH
Button Three buttons on the upper side of the
programming pendant are denoted as follows:
HOLD button
START button
EMERGENCY STOP button
Displays The menu displayed in the programming
pendant is denoted with { }.
e.g. {JOB}
PC Keyboard The name of the key is denoted.
e.g. Ctrl key on the keyboard
GO BACK
PAGE
SHIFT
TOOL SEL
COORD
6/55