YASKAWA Lift Inverter L1000V, Техническое руководство

Страница: 158 / 282

5.11 S: Elevator Parameters
158 YASKAWA EUROPE SIEP YASKAWA AC Drive L1000V Technical Manual
u
S4: Rescue Operation
Rescue Operation switches to a backup battery or some other UPS during a power outage. Refer to Rescue Operation on
page 91 for details.
n
S4-01: Light Load Direction Search Selection
Enables and disables the Light Load Direction Search.
0: Disabled
1: Enabled
n
S4-02: Light Load Direction Search Method
Determines the method used to perform Light Load Direction Search.
0: Output current
1: Detect direction of regeneration
n
S4-03: Light Load Direction Search Time
Sets the time to perform Light Load Direction Search.
n
S4-04: Light Load Direction Search Speed Reference
Sets the speed reference to use during Light Load Direction Search.
n
S4-05: Rescue Operation Torque Limit
Sets a time limit for Light Load Direction Search.
u
S6: Faults for Elevator Applications
n
S6-01: Motor Contactor Response Error (SE1) Detection/Reset Selection
Determines when the drive should detect a motor contactor response error (SE1). SE1 is triggered if there is no response
from the motor contactor within the time set in S6-10 after the contactor control output has been set.
0: Detect during stop, SE1 must be manually reset
1: Detect during stop, SE1 can be automatically reset
2: No SE1 detection
No. Parameter Name Setting Range Default
S4-01 Light Load Direction Search Selection 0 to 2 0
No. Parameter Name Setting Range Default
S4-02 Light Load Direction Search Method 0 or 1 0
No. Parameter Name Setting Range Default
S4-03 Light Load Direction Search Time 0.0 to 5.0 s 1.0 s
No. Parameter Name Setting Range Default
S4-04 Light Load Direction Search Speed Reference 0.00 to 20.00% Determined by A-02
No. Parameter Name Setting Range Default
S4-05 Rescue Operation Torque Limit 0 to 300% 100%
No. Parameter Name Setting Range Default
S6-01 Motor Contactor Response Error (SE1) Detection/Reset Selection 0 to 2 0