YASKAWA Lift Inverter L1000V, Техническое руководство

Страница: 118 / 282

5.4 d: Reference Settings
118 YASKAWA EUROPE SIEP YASKAWA AC Drive L1000V Technical Manual
n
d1-20, d1-21, d1-22: Intermediate Speeds 1 to 3
Sets intermediate speeds 1 through 3.
n
d1-23: Releveling Speed
Sets the releveling speed when a multi-function input terminal is programmed for “Releveling speed” (H1- = 52).
n
d1-24: Inspection Operation Speed
Sets the inspection speed when a multi-function input terminal is programmed for “Inspection speed” (H1- = 54). A
description of the inspection speed can be found in Inspection Operation on page 89 .
n
d1-25: Rescue Operation Speed
Determines the speed during Rescue Operation. Refer to Rescue Operation on page 91 for details.
n
d1-26: Leveling Speed
Sets the inspection speed when a multi-function input terminal is programmed for “Leveling speed” (H1- = 53).
n
d1-28: Leveling Speed Detection Level
When the speed priority selection in d1-18 is set to “0” or “3” and the speed reference value falls below the level set in
d1-28, the drive interprets the selected speed as leveling speed. This parameter must be set to use the Speed Control Loop
setting 3 when d1-18 = 0/3. Refer to
C5: Speed Control Loop on page 114 for details.
n
d1-29: Inspection Speed Detection Level
When the speed priority selection in d1-18 is set to “0” or “3” and the speed reference value is below the level set in d1-
29 but higher than the level set in d1-28, the drive interprets the selected speed as inspection speed. This parameter must
be set to use the Inspection Operation function when d1-18 = 0/3. Refer to
Inspection Operation on page 89 for details.
No. Name Setting Range Default
d1-20
<1> Setting ranges and defaults vary by the setting units determined by parameter o1-03. Refer to Defaults and Setting Ranges by Display Unit
Selection (o1-03) on page 250 for details.
Intermediate Speed 1 0.00 to 120.00 Hz
<1>
0.00 Hz
<1>
d1-21 Intermediate Speed 2 0.00 to 120.00 Hz
<1>
0.00 Hz
<1>
d1-22 Intermediate Speed 3 0.00 to 120.00 Hz
<1>
0.00 Hz
<1>
No. Name Setting Range Default
d1-23
<1> Setting ranges and defaults vary by the setting units determined by parameter o1-03. Refer to Defaults and Setting Ranges by Display Unit
Selection (o1-03) on page 250 for details.
Releveling Speed 0.00 to 120.00 Hz
<1>
0.00 Hz
<1>
No. Name Setting Range Default
d1-24
<1> Setting ranges and defaults vary by the setting units determined by parameter o1-03. Refer to Defaults and Setting Ranges by Display Unit
Selection (o1-03) on page 250 for details.
Inspection Operation Speed 0.00 to 120.00 Hz
<1>
0.00 Hz
<1>
No. Name Setting Range Default
d1-25
<1> Setting ranges and defaults vary by the setting units determined by parameter o1-03. Refer to Defaults and Setting Ranges by Display Unit
Selection (o1-03) on page 250 for details.
Rescue Operation Speed 0.00 to 15.00 Hz
<1>
5.00 Hz
<1>
No. Name Setting Range Default
d1-26
<1> Setting ranges and defaults vary by the setting units determined by parameter o1-03. Refer to Defaults and Setting Ranges by Display Unit
Selection (o1-03) on page 250 for details.
Leveling Speed 0.00 to 120.00 Hz
<1>
4.00 Hz
<1>
No. Name Setting Range Default
d1-28 Leveling Speed Detection Level 0.00 to 120.00 Hz 0.00 Hz
No. Name Setting Range Default
d1-29 Inspection Speed Detection Level 0.00 to 120.00 Hz 0.00 Hz