Physical Installation 1 - 4
Drive Model Numbers
The model number of the Drive on the nameplate indicates the design specification, voltage, and drive rating of the Drive in
alphanumeric codes.
Fig 1.2 Drive Model Number Structure
Drive Enclosure and Revision Code
The “Spec” number on the nameplate indicates the voltage, Drive rating, enclosure type, and the revision code of the Drive in
alphanumeric codes.
Fig 1.3 “Spec” Number Structure
TERMS
Open Chassis Type (IEC IP00)
Protected so that parts of the human body cannot reach electrically charged parts from the front when the
Drive is mounted in a control panel, also called (protected chassis).
NEMA 1 Type (IEC IP20)
The Drive is shielded from the exterior, and can thus be mounted to the interior wall of a standard building
(not necessarily enclosed in a control panel). The protective structure conforms to the standards of NEMA 1
in the USA. Top protective cover (Fig 1.4) must be installed to conform with IEC IP20 and NEMA Type 1
requirements.
No.
Spec
UL Specification
CIMR – E7 U 2 0 P4
AC Drive
E7
U
No.
Voltage
2
4
3-phase, 208-240Vac
3-phase, 480Vac
Rating
2 0P 4 1 A
No.
2
4
Voltage
3-phase, 208 - 240Vac
3-phase, 480Vac
No.
Enclosure Type
0
Open chassis (IEC IP00)
1
NEMA 1 (IEC IP20)
Rating
Hardware Revision
Содержание E7 Drive
