manualshive.com logo in svg

YASKAWA DO-A3, Руководство пользователя и инструкция по установке

Поделиться
Скачать
YASKAWA DO-A3 Скачать руководство пользователя страница 5

1  Preface and Safety

YASKAWA ELECTRIC

 TOBP C730600 79C YASKAWA AC Drive Option AO-A3 Installation Manual

 5

u

Terms

u

Registered Trademarks

Trademarks are the property of their respective owners.

u

Supplemental Safety Information

Read and understand this manual before installing, operating, or servicing this option. Install 

the option according to this manual and local codes.
The following conventions indicate safety messages in this manual. Failure to heed these 

messages could cause fatal injury or damage products and related equipment and systems.

Note:

Indicates supplemental information that is not related to safety messages

Option: 

YASKAWA AC Drive Option Analog Monitor AO-A3 

Drive:

• YASKAWA A1000-Series Drive
• YASKAWA L1000A-Series Drive
• YASKAWA D1000 Series Power Regenerative Converter
• YASKAWA R1000 Series Power Regenerative Unit
• YASKAWA U1000-Series Drive
• YASKAWA U1000L-Series Drive
• YASKAWA AC Drive GA700
• YASKAWA AC Drive CR700
• YASKAWA AC Drive CH700
• YASKAWA AC Drive 1000-Series (A1000, L1000A, D1000, R1000, U1000, U1000L)

Digital Operator:

• LCD Operator for YASKAWA AC Drive 1000-Series
• LED Operator for YASKAWA AC Drive 1000-Series
• LCD Keypad for YASKAWA AC Drive GA700, CR700, and CH700
• LED Keypad for YASKAWA AC Drive GA700, CR700, and CH700

Energy-Saving Unit:

• YASKAWA D1000 Series Power Regenerative Converter
• YASKAWA R1000 Series Power Regenerative Unit

DANGER

Indicates a hazardous situation, which, if not avoided, will cause death or serious 
injury

.

GEM_IO_conditional_E_AO.fm  5 ページ  ２０１７年７月５日　水曜日　午後５時３３分

Содержание DO-A3








































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды