manualshive.com logo in svg

YASKAWA DO-A3, Руководство пользователя и инструкция по установке

Поделиться
Скачать
YASKAWA DO-A3 Скачать руководство пользователя страница 4

4

 

YASKAWA ELECTRIC

 TOBP C730600 79C YASKAWA AC Drive Option AO-A3 Installation Manual

1  Preface and Safety

1

Preface and Safety

YASKAWA Electric supplies component parts for use in a wide variety of industrial 

applications. The selection and application of YASKAWA products remain the responsibility 

of the equipment designer or end user. 

YASKAWA accepts no responsibility for the way its products are incorporated into the final 

system design. Under no circumstances should any YASKAWA product be incorporated into 

any product or design as the exclusive or sole safety control. Without exception, all controls 

should be designed to detect faults dynamically and fail safely under all circumstances. All 

products designed to incorporate a component part manufactured by YASKAWA must be 

supplied to the end user with appropriate warnings and instructions as to the safe use and 

operation of that part. Any warnings provided by YASKAWA must be promptly provided to 

the end user. YASKAWA offers an express warranty only as to the quality of its products in 

conforming to standards and specifications published in the manual. NO OTHER 

WARRANTY, EXPRESS OR IMPLIED, IS OFFERED. YASKAWA assumes no liability 

for any personal injury, property damage, losses, or claims arising from misapplication of its 

products.

u

Applicable Documentation

The following manuals are available for the option: 

Analog Monitor AO-A3 Option

YASKAWA AC Drive Option

Analog Monitor AO-A3

Installation Manual

Manual No: TOBP C730600 79

(This book)

This guide is packaged together with the product and contains 
information necessary to install the option and set related drive 
parameters.

Yaskawa Drive

YASKAWA AC Drive 

Manuals

Drive manuals contain basic installation and wiring information 
in addition to detailed parameter setting, fault diagnostic, and 
maintenance information. 
The most recent versions of these manuals are available for 
download on our documentation websites:
U.S.: http://www.yaskawa.com
Europe: http://www.yaskawa.eu.com
Japan: http://www.e-mechatronics.com
Other areas: Check the back cover of these manuals.

GEM_IO_conditional_E_AO.fm  4 ページ  ２０１７年７月５日　水曜日　午後５時３３分

Содержание DO-A3








































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды