background image

YASKAWA Europe GmbH

In the event that the end user of this product is to be the military and said product is to be employed in any weapons systems or the manufacture 
thereof, the export will fall under the relevant regulations as stipulated in the Foreign Exchange and Foreign Trade Regulations.  Therefore, be sure 
to follow all procedures and submit all relevant documentation according to any and all rules, regulations and laws that may apply.
Specifications are subject to change without notice for ongoing product modifications and improvements.

©

 2010 YASKAWA Europe GmbH. All rights reserved.

EUROPEAN HEADQUARTERS

YASKAWA EUROPE GmbH

Am Kronberger Hang 2, 65824 Schwalbach, Germany

Phone: +49 (0)6196 569 300     Fax: +49 (0)6196 569 398

E-mail: [email protected]    Internet: http://www.yaskawa.eu.com

YASKAWA ENGINEERING EUROPE GmbH

Am Kronberger Hang 2, 65824 Schwalbach, Germany

Phone: +49 (0)6196 569 520     Fax: +49 (0)6196 569 598

E-mail: [email protected]

U.S.A.

YASKAWA AMERICA, INC.

2121 Norman Drive South, Waukegan, IL 60085, U.S.A.

Phone: +1 847 887 7000     Fax: +1 847 887 7170

Internet: http://www.yaskawa.com

JAPAN

YASKAWA ELECTRIC CORPORATION

New Pier Takeshiba South Tower, 1-16-1, Kaigan, Minatoku, Tokyo, 105-0022, Japan 

Phone: +81 (0)3 5402 4511     Fax: +81 (0)3 5402 4580

Internet: http://www.yaskawa.co.jp

Published in Germany   

May

 2010  

10-5

MANUAL NO.  TOEP C710606 27A

07-12_YEU

Quick Start Guide

YASKAWA AC Drive J1000

Compact V/f Control Drive

2

Содержание CIMR-JCBA0001





































Отзывы: