13
Press the right top menu “ ” on the screen and press “save”.
Forthis setting is complete, refer to the illustration below:
Press back when saving is complete, press the WIDI network name,
For example, double press “KW”, it will then enter into an interface
and ask you input the code. Then enter the correct code, press
“finish”. The system will then connect and distribute IP address
automatically. It will show “connected” once the system has
completed connection. You can see the network connection status
accordingly when you press the network name, see the illustration
below:
2. Manual setup IP address:
Whether Using manual setup IP address or not, depends on the
WIFI Router’s setting. If distributing the network name this way,
just press the top right corner of the screen “
” to enter into
“advanced” setting and select the “Use static IP”, then set the IP
address as it is from the Router. See the illustration below.
Connection information
