33
3.4 Charging unit
The charging units can recharge up to 24 receivers at one. The charging unit contains the power supply
with automatic voltage selection. The charging electronics and
each receiver. The charging circuitry checks if a battery pack is present and controls the charging
process.
Ensure that the charging unit is connected to the power and that it is switched on. Place the receivers
uld illuminate. The indicator show the
charging status of each receiver:
Notice!
Ø
It is preferred to switch on the charging unit before inserting the receivers. Receivers can be inserted
or removed without damage while the charging unit is switched on.
Ø
Charge the batteries to full capacity before using them for th
Ø
utes after inserting a receiver. Inserting
the receiver multiple times with fully charged batteries should therefore be avoided, as this will
damage the batteries.
Ø
Continuously charging the racier will not damage the receiver or batteries. Receivers can therefore
safely be left in their charging positions when they are not used.
POWER
AC 220V
FUSE 10A
