Yardworks CLM48BCU1 Скачать руководство пользователя страница 7

Страница: 7 / 40

model no. 060-1982-2 | contact us: 1.866.523.5218

d) Do not remove battery pack from its

original packaging until required for
use.

e) Do not subject battery pack to

mechanical shock.

f) In the event of battery leaking, do not

allow the liquid to come in contact
with the skin or eyes. If contact has
been made, wash the affected area
with copious amounts of water and
seek medical advice.

g) Observe the plus (+) and minus

(–) marks on the battery back and
equipment and ensure correct use.

h) Do not use any battery pack which

is not designed for use with the
equipment.

i) Keep battery pack out of the reach of

children.

j) Seek medical advice immediately if a

cell or battery has been swallowed.

k) Always purchase the battery pack

recommended by the manufacturer for
the equipment.

l) Keep battery pack clean and dry.
m) Wipe the battery pack terminals with a

clean, dry cloth if they become dirty.

n) Battery pack needs to be charged

before use. Always use the
correct charger and refer to the
manufacturer’s instructions or
equipment manual for proper charging
instructions.

o) Do not leave battery pack on

prolonged charge when not in use.

p) After extended periods of storage,

it may be necessary to charge
and discharge the battery pack
several times to obtain maximum
performance.

q) Battery pack gives its best performance

when it is operated at normal room
temperature: 20

C (68

F).

r) When disposing of battery packs,

keep battery packs of different
electrochemical systems separate
from each other.

s) Recharge only with the charger

specified by manufacturer. Do not

use any charger other than that

specifically provided for use with the

equipment.

A charger that is suitable for

one type of battery pack may create a

risk of fire when used with another battery

pack.

t) Retain the original product literature

for future reference.

u) Use only the battery pack in the

application for which it was intended.

v) Remove the battery pack from the

equipment when not in use.

w) Dispose of properly.

Safety Instructions For Walk-behind
Mowers
IMPORTANT
Safe Practices for Walk-behind Mowers
I. GENERAL OPERATION

1. Read, understand, and follow all

instructions on the machine and in the
manual(s) before starting.

2. Do not put hands or feet near or

under the machine. Keep clear of the
discharge opening at all times.

3. Only allow responsible adults, who are

familiar with the instructions, to operate
this machine.

4. Clear the area of objects such as rocks,

wire, toys, etc., which could be thrown by
the blade. Stay behind the handle when
the motor is running.

5. Be sure the area is clear of bystanders

before operating. Stop machine if
anyone enters the area.

6. Do not operate machine barefooted or

while wearing sandals. Always wear
proper footwear.

7. Do not pull machine backward unless

Safety Instructions

Содержание CLM48BCU1









































Результаты поиска

Содержание CLM48BCU1

Отзывы:

Бренды по названию

Популярные бренды

Yardworks CLM48BCU1, Инструкция по эксплуатации

Результаты поиска

Содержание CLM48BCU1

Отзывы:

Бренды по названию

Популярные бренды