21
WARNING:
Switch off the machine and remove the battery packs prior to any troubleshooting.
PROBLEM
POSSIBLE CAUSE
SOLUTION
The handle is not in position.
Handle locking knobs are not secured.
Make sure that the knobs are fully
tightened and closed.
Motor does not start
Battery not installed well.
Battery depleted.
Lock-off button not depressed.
Battery too cold.
Check the battery is fully inserted.
Charge the battery.
Depress the lock-off button fully and then
squeeze the operating bail.
Remove battery from snow Blower. Place
battery on charger and allow to charge for
10 minutes. Remove from charger and
install in snow Blower for use.
Poor performance
Discharge chute blocked.
Switch off the snow Blower, remove the
battery pack, and clean the discharge
chute and the auger housing. DO NOT
use hand to clean, use clean-out tool,
like a brush.
Then motor is on but the auger
does not turn.
The belt is damaged.
Replace the belt.
LIMITED WARRANTY SERVICE
2-Year Tool, Battery and Charger Warranty
Against Defects in Materials, Parts or Workmanship.
All Units Must Be Used and Maintained in Accordance with The Directions and Regulations in The
Operator's Manual.
TROUBLE SHOOTING
WARRANTY
