background image

17

 

 

Operation

 

Intended use

 

This snow blower is intended for outdoor snow removable. It is not intended for indoor usages.

 

WARNING: Always use this product with caution and in accordance to the operating 

instructions.

 

WARNING: Do not use any attachments or accessories not recommended by the 

manufacturer of this product. The use of attachments or accessories not recommended

 

can result in serious personal injury.

 

 

WARNING: Keep the area to be cleared free of stones, toys or other foreign objects that 

the auger might pick up and throw. Such items could be covered by snow and are easy to

 

overlook, so be sure to conduct a thorough inspection of the area before beginning work.

 

 

 

 

NOTICE: 

Before each use, check and make sure all fasteners on the snow blower (screws, bolts, etc.) 

are fully tightened. Check the scraper blade and the auger for wear and tear at regular intervals.

 

 

To start the snow blower:

 

 

WARNING: Start the snow blower on 

level ground) position.

 

Depress and hold the lock-off button

① 

with one 

hand, and then pull the operating bail 

② 

towards 

you with another hand. Once the machine is 
switched on, you can release the lock-off 

① 

button. 

(See Fig. 19)

 

NOTICE: 

The snow blower can only be started by 

depressing the lock-off button first, followed by 
squeezing the operating bail; reverse operation will 
not start the machine.

 

 

To stop the snow blower:

 

Just release your grip on the operating bail to stop 
the machine.

 

 

LED LIGHTS

 

 

The snow blower is equipped with 2 LED lights 
that is used to illuminate the dark area. The LED 
lights will automatically turn on when the snow 
blower is switched on and will automatically turn 
off when the snow blower is turned off.

 

(See Fig. 20)

 

STARTING/STOPPING THE SNOW BLOWER

 

20

 

19 

 

 

 

 

 

 

 

 

1

 

 

Содержание 270-3397























Отзывы: