START TIME
■
Press the + button to advance start time
(hold button for quick advance).
■
Press the – button to reverse start time
(hold button for quick reverse).
HOW LONG
Set watering duration from 1 to 240 minutes using
the + and – buttons.
HOW OFTEN
Set watering frequency as every 6 hrs, 12 hrs, or
from 1 to 7 days using the + and – buttons. 1 is
every day, 2 is every other day etc. up to 7 days.
AUTO
Timer waters according to programmed time,
duration, and frequency.
RAIN DELAy
■
When in
AUTO
, press + button for 24 hrs,
48 hrs, or 72 hrs.
■
Screen will flash between clock and hours
remaining before programmed cycle resumes.
■
To remove rain delay, turn dial to
OFF
and then
back to
AUTO
.
MANUAL/HAND WATERING
To water without interrupting the set cycle, press
[MANUAL] button and then use + and – buttons to
set from 1 to 240 minutes.
■
To remove manual watering (turn off),
turn dial to
OFF
.
■
To resume programmed cycle turn the
dial back to
AUTO
.
INSTALLING THE bATTERIES
■
Remove the tray on the back of the timer by
sliding it out.
■
Insert two AA (1.5 V) alkaline batteries
(not included) and replace the tray.
■
Replace batteries when low battery icon appears.
INSTALLATION
■
Attach timer to an outdoor hose faucet and turn
on after programming.
PROGRAMMING THE TIMER
■
Rotate the dial to positions indicated for setup.
SET CLOCK
■
Press the + button to advance clock time
(hold button for quick advance).
■
Press the – button to reverse clock time
(hold button for quick reverse).
PN 91234-24 rB
2-outlet Water timer
With Digital Display
059-3230-0
■
PROGRAMMING FOR THE DIGITAL OUTLET OF THE TIMER
■
THE MANUAL OUTLET CANNOT bE PROGRAMMED DIGITALLy
MANUAL OUTLET
The manual port of the timer gives access to the
hose faucet without interrupting the programmed
cycle of the digital outlet.
■
Open the valve in the outlet by turning the lever
counterclockwise to the open position.
■
Close the valve by turning the lever to the
closed position.
TROUbLESHOOTING
Water does not come on at desired time.
Check if:
■
Clock is set to correct time including AM and PM.
■
Start time is set to desired time including
AM and PM.
■
Rain Delay is on.
Timer does not water.
Check if:
■
Faucet is on.
■
Timer is set to AUTO.
■
Hose faucet is on.
■
Batteries are low.
■
Clock is set to correct time including AM and PM.
■
Rain Delay is on.
Water won’t turn off.
Check if:
■
Watering duration is set to desired time.
■
Start times begin after previous watering cycle
has run through all stations and set durations.
■
For bypass/manual outlet: close valve.
Working Water Pressure
Minimum: 25 psi Maximum: 100 psi
Working Temperature
Maximum: Do not exceed 120 degrees F
Minimum: Keep from freezing
Warnings
For outdoor use with cold water only.
p 801 295 9820
f 801 951 5815
www
.fluid-studio
.net
1065 South 500
W
est
Bountiful,
Utah 84010
pr
oof no:
2
d
ate:
02.11.10
des:
SH
spck:
SH
job no:
client:
ORB
sku:
91234
upc:
NA
file name:
91234-24 rB
.indd
softw
are:
InDesign CS3
colors
additional instructions:
·
Font sizes cannot be smaller than 7 pt.
·
Proofing Code:
LB412365
·
color non printing Die
PMS
???
color non printing
Glue
Area
color non printing
Product P
osition
PMS
???
Registration
Black
Printers are responsible for
meeting print production
requirements
. An
y changes
must be appro
ved b
y the
client and Fluid Studio
.
printed piece must meet
designa
ted specifica
tions
on this form
.
dimensions:
fla
t:
w:
12.0"
h:
6.0"
finished:
w
3.0"
d:
0
h
3.0"
© 2007 Fluid Studio
. T
his
w
ork
is
the
property
of
Fluid
Studio
, and cannot be used,
reproduced or distributed
in an
y w
ay without their
express permission.
Imported by yardWorks Canada Toronto, Canada M4S 2b8
