model no. 060-3874-8 | contact us: 1.866.523.5218
20
AIR VENTS
Never cover air vents. Keep them free of obstructions and debris. They must always remain
clear for proper motor cooling.
OPERATING AS A BLOWER
hold the blower firmly. Sweep from side to side with the nozzle several inches above the
ground or floor. Slowly advance the unit, keeping the accumulated pile of debris in front of
you. most dry blowing operations are better suited to low speeds, rather than high speeds.
high-speed blowing is a better way to move heavier items like large debris or gravel.
OPERATING AS A VACUUM
hold the vac firmly, tilting the vacuum tubes (2-4 in. or 5-10 cm), and use a sweeping action
to collect light debris. The debris will flow into the bag. Items such as small leaves and twigs
will be mulched as they pass through the fan housing. For longer bag life and increased
performance, empty the bag often.
CLEARING A BLOCKED TUBE / IMPELLER
1. Slide the Power/Speed switch down to the OFF position, and wait until the unit comes to a
complete stop.
2. unplug the unit.
3. Remove the blower tube or vacuum tubes and the bag.
4. Carefully remove material blocking the tube or impeller. Inspect the blades to ensure that
no damage has occurred. Rotate the impeller blades by hand to ensure that the blockage is
completely cleared.
5. Reinstall the blower tube or vacuum tubes and the bag.
6. Plug the unit back into the power supply.
STOP! BLOWER WILL NOT RUN UNTIL GATE IS CLOSED AND LOCKED!
WARNING
: To avoid serious personal injury, do not wear loose-fitting
clothing or articles such as scarves, strings,chains, ties, etc., that could
get drawn into the air vents. Tie back long hair to make sure it does not get
drawn into the air vents.
WARNING
:To avoid serious personal injury, be sure the unit is OFF and
unplugged before clearing the impeller.
WARNING
:To avoid serious personal injury, always wear gloves to protect
yourself from the impeller blades or other sharp objects.
Maintenance
