model no. 060-3874-8 | contact us: 1.866.523.5218
12
model no. 060-3874-8 | contact us: 1.866.523.5218
ASSEMBLE AS A VACUUM
1. Slide the front and rear vacuum tubes together until the lock button engages.
2. Pull the lock button forward to disengage the gate. hold the gate open (see Fig. 1 on page
13).
3. Insert the “wedged” end clip of the vacuum tube into the rear clip (see Fig. 2 on page 13).
Push the “hooked” end clip of the vacuum tube into the front clip (see Fig. 3 on page 13).
Press the lock button back to engage the vacuum tube (see Fig. 4 on page 13).
4. To remove vacuum tubes, follow steps (3) (2) (1).
5. Insert the bag adaptor into the blower outlet. Lock the bag adaptor with the lock button.
To remove the bag, simply press lock button and remove bag (See Page 15).
NOTE
: It may be necessary to remove the blower tube or vacuum tubes to clear a blocked
tube or impeller.
WARNING:
To prevent serious personal injury, make sure the unit is in
the OFF position, it is unplugged, and the impellers have stopped before
attaching or removing tubes.
A
ssembl
y
