Yardworks 060-1300-6, Инструкция по эксплуатации

Страница: 81 / 86

model no.
060-1300-6
| contact us: 1.866.523.5218 model no.
060-1300-6
| contact us: 1.866.523.5218
81
TROU
bles
HOO
TING
PRObleM POssIble CAUse sOlUTION
No spark
Too much carbon deposit and dirt around
electrodes.
Clear carbon deposits.
Too much carbon deposit and dirt around
electrodes.
Replace spark plug.
Too much carbon deposit and dirt around
electrodes.
Adjust to proper value.
Abnormal
cylinder
compression
Piston ring is at its wear limit Replace.
Piston ring is broken. Replace.
Piston ring is sticking. Clear up carbon fouling.
Spark plug is not installed tightly or gasket
is missing.
Tighten with a gasket in.
Air leakage between cylinder block and
cylinder head.
Check cylinder gasket and the
flatness of the surface where the
cylinder block contacts the cylinder
head
Tighten cylinder head bolts in
stipulated order to stipulated torque.
Air leakage in the valves.
Check valve clearance and
tightness. Repair if necessary.
If engine still doesn’t start, contact our Technical Support Team for service and/or repair.
 WARNING:
–
When testing the spark plug, never hold the high-voltage wire of the
spark plug with wet hand.
–
Make sure there is no spilled fuel outside the engine and that the
spark plug isn’t covered with fuel.
–
To prevent fire, keep sparks far away from the spark plug mounting
hole.