Yardworks 060-1300-6 Скачать руководство пользователя страница 61 | Manualshive

Страница: 61 / 86

Yardworks 060-1300-6 Скачать руководство пользователя страница 61

model no.

060-1300-6

| contact us: 1.866.523.5218

model no.

060-1300-6

| contact us: 1.866.523.5218

61

model no.

060-1300-6

| contact us: 1.866.523.5218

TRAN

s

PORT

ATION

AND

s

TORA

G

e

Transport with the fuel valve turned the “OFF” position. Transport or store the engine when

it is cool to avoid getting burns or starting a fire.

Off-seAsON sTORAGe
When the tiller won’t be used for an extended period, prepare it for storage as follows:
1.  Make sure the storage area is dry and free of dust.
2.  Clean the tiller and engine.
3.  Do routine tiller lubrication and check for loose parts and hardware.
4.  Turn the fuel valve to “OFF” position, set a proper container under the carburetor.
5.  Drain the oil out of the gasoline engine.
6.  Remove the spark plug. Place about a spoon of fresh engine oil into the cylinder. Crank

the engine to distribute engine oil evenly.

7.  Reinstall the spark plug.
8.  Store unit in a clean, dry area.
9.  Never store the tiller with fuel in the fuel tank in an enclosed area where gas fumes

could reach an open flame or spark, or where ignition sources are present (space

heaters, hot water heaters, furnaces, etc.)

10. Loosen the oil drain bolt and completely drain the gasoline out of the carburetor into

proper container and screw the oil drain bolt down. Remove the sediment bowl after

closing fuel cock, and completely pour the gasoline out the sediment bowl. Finally

reinstall the sediment bowl back and screw it down.



NOTICe: Do not tilt the engine to avoid fuel spills. Spilled fuel or fuel

vapour may ignite and cause fire.



WARNING: Fuel is extremely flammable and explosive under certain

conditions. Keep smoke, fire and spark away from operating site.

«
...
59
60
61
62
63
...
»

Содержание 060-1300-6























































































Отзывы:

Нет отзывов