3i. Any CPE Authorized and approved emission-related replacement part may be used in the performance of
any ECS Warranty maintenance or repair and will be provided without charge to the owner. Such use shall
not reduce CPE’s warranty obligation.
3j. Unapproved add-on or modified parts may not be used to modify or repair a CPE engine. Such use voids
this ECS Warranty and shall be sufficient grounds for disallowing an ECS Warranty claim. CPE shall not
be liable hereunder for failures of any warranted parts of a CPE engine caused by the use of such an
unapproved add-on or modified part.
EMISSION-RELATED PARTS INCLUDE THE FOLLOWING: (using those portions of the list
applicable to the engine)
Systems covered by this warranty
Parts Description
Fuel Metering System
Carburetor and internal parts (and/or pressure regulator or fuel
injection system) Air/fuel ratio feedback and control system. Cold start
enrichment system.
Air Induction System
Controlled hot air intake system. Air Filter, Intake manifold.
Ignition System
Spark plug. Magneto or electronic ignition system. Spark advance/
retard system.
Exhaust Gas Recirculation (EGR) System EGR valve body, and carburetor spacer if applicable. EGR rate feedback
and control system.
Air Injection System
Air pump or pulse valve. Valves affecting distribution of flow.
Distribution manifold.
Catalyst or Thermal Reactor System
Catalytic converter. Thermal reactor. Exhaust manifold.
Particulate Controls
Traps, filters, precipitators, and any other device used to capture
particulate emissions.
Miscellaneous Parts
Vacuum, temperature, and time sensitive valves and switches.
Electronic controls. Hoses, belts, connectors, and assemblies.
Evaporative Controls
Fuel Tank, Fuel Cap, Fuel Lines (for liquid fuel & fuel vapors), Fuel
Line Fittings, Clamps, Pressure Relief Valves, Control Valves, Control
Solenoids, Electronic Controls, Vacuum Control Diaphragms, Control
Cables, Control Linkages, Purge Valves, Gaskets, Liquid/Vapor
Separator, Carbon Canister, Canister Mounting Brackets, Carburetor
Purge Port Connector.
TO OBTAIN WARRANTY SERVICE:
You must take your CPE engine or the product on which it is installed, along with your warranty registration card or
other proof of original purchase date, at your expense, to any Champion Power Equipment dealer who is authorized
by Champion Power Equipment, Inc. to sell and service that CPE product during his normal business hours. Alternate
service locations defined in Section (3)(f) above must be approved by CPE prior to service. Claims for repair or
adjustment found to be caused solely by defects in material or workmanship will not be denied because the engine
was not properly maintained and used.
If you have any questions regarding your warranty rights and responsibilities, or to obtain warranty service,
please write or call Customer Service at Champion Power Equipment, Inc.
Champion Power Equipment, Inc.
12039 Smith Ave.
Santa Fe Springs, CA 90670
1-877-338-0999
Attn.: Customer Service