YARDMAX YS0952, Руководство оператора

Страница: 8 / 20

YS0952PM00 - 2002
MAX PRESSURE LIMITING SCREW
Do not adjust the max pressure limiting screw!
Max pressure was preset at the factory by a qualified
mechanic using professional tools.
Unauthorized resetting will prevent the hydraulic
pump from providing enough splitting pressure or
RESULT IN SERIOUS INJURY AS WELL AS DAMAGE
TO THE MACHINE.
This log splitter is a home use model. It is designed for operating
under ambient temperatures b5°C and 40°C and for
installation at altitudes no more than 1000m above M.S.L. The
surrounding humidity should be less than 50% at 40°C. It can
be stored or transported under ambient temperatures between
-25°C and 55°C.
For your safety, your log splitter is equipped with a “ZHB”
control system that requires both hands of the operator. The
left hand controls the hydraulic control lever while the right
hand controls the pushbutton switch. The log splitter will stop
if the lever or pushbutton are released. Only after the lever
and pushbutton are released will the log ram return to its
starting position.
If the log does not begin to split after 5 seconds
of operation, release both controls. The motor or
hydraulic fluid may overheat and damage your
log splitter.
Your YARDMAX log splitter is designed to operate in
temperatures between 40°F and 100°F and at altitudes below
3,200 ft (above sea level). The surrounding humidity should
be less than 50% at 100°F. It can be stored or transported in
temperatures between -10°F and 130°F.
Confirm that you have a US Standard, 3 pin grounded, Type B 15
AMP (NEMA 5-15).
Check that the electric circuit is grounded, adequately protected,
and that it corresponds with the power, voltage, and frequency of
the motor.
ELECTRICAL REQUIREMENTS
APPLICATION CONDITIONS
TWO-HANDED OPERATION OPERATING CONDITIONS
OPERATION
LEFT HAND RIGHT HAND
Max Pressure
Limiting Screw
7
|
Know Your Machine & Operation