1. Insert a M12x25 philips screw from outside through the hole
in the drum. Mount the mixing blade on the screw from inside.
Secure it loosely with a M12 nut. (
See
Figure 2
)
2. Repeat the above step to secure the second mixing blade to the
inside of the drum.
3. Finally, tighten all nuts and bolts to tightly secure blades.
1. Mount the cement mixer drum onto the gear box shaft. Turn
the drum clockwise on the gear box shaft thread until the shaft
is completely located in the drum. (
See
Figure 3
)
2. Slide drum handles through holes in the drum support frame
and notches.
3. Insert the R-pins through the holes in the handles to hold them
in place.
Figure 2
Figure 3
DRUM AND DRUM HANDLES
MIXING BLADES
16
mm
13
mm
18
mm
19
mm
30
mm
32
mm
M12 × 25
× 4
4
Ø 3.5
× 2
5
Tight
Loose
8
Electric Concrete Mixer
»
Operator’s Manual
Assembly
|
74109US25M101.indd 8
2017/7/4 17:22:36
